Q1_Aircraft: GU vs LSI

Rocky,
i would be interested in the a set of templates if you get it all figured out.


fuddworks < rockaford99@... > wrote:
are ls1 quickies really that rare? i just picked up a project with
an ls1 and the carbon spars yesterday. i haven't really gone
through the kit yet to see what all is with it, i'll do that
sunday. if i can come accross the ls1 timplates (which i think i do
have, but i need to verify) i will be happy to share if anyone needs
them. i'll probably digitize them into autocad and get some lazer
cut aluminum timplates. if anyone is interested i could post the
autocad drawing.

rocky chambers
chattanooga, tn


--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...> wrote:
>
> Matt,
>
> Terry Crouch is the only one I know of that has a flying Q1 with
an
> LS1 canard.
>
> Ryan
>
> --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...>
wrote:
> >
> > Does any one have a LS1 on there quickie and is it that much
better?
> > Matt
> > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...> wrote:
> > >
> > > Leon,
> > >
> > > Do you have the LS1 templates avaliable yet for the Q1 ?
> > >
> > > Ryan
> > >
> > > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...>
> wrote:
> > > >
> > > > I am ready to cut my candard. Before i start is it
possible
> to
> > get
> > > > LSI templates and intructions for my q1?
> > > >
> > >
> >
>






SPONSORED LINKS
Experimental aircraft Aviation gear Aviation Experimental

---

YAHOO! GROUPS LINKS


Visit your group 'Q1_Aircraft' on the web.

To unsubscribe from this group, send an email to:
This email address is being protected from spambots. You need JavaScript enabled to view it.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---

---

Find your next car at Yahoo! Canada Autos

[Non-text portions of this message have been removed]

good news: i do have the ls1 canard templates for the q1. bad news:
they are already cut out and pasted to 1/8' board. this will make
it rather hard to provide digital data with any accuracy. sorry
guys.

rocky


--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , matt Hughes <smoothmatson@y...>
wrote:
>
> Rocky,
> i would be interested in the a set of templates if you get it all
figured out.
>
>
> fuddworks <rockaford99@h...> wrote:
> are ls1 quickies really that rare? i just picked up a project
with
> an ls1 and the carbon spars yesterday. i haven't really gone
> through the kit yet to see what all is with it, i'll do that
> sunday. if i can come accross the ls1 timplates (which i think i
do
> have, but i need to verify) i will be happy to share if anyone
needs
> them. i'll probably digitize them into autocad and get some lazer
> cut aluminum timplates. if anyone is interested i could post the
> autocad drawing.
>
> rocky chambers
> chattanooga, tn
>
>
> --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...> wrote:
> >
> > Matt,
> >
> > Terry Crouch is the only one I know of that has a flying Q1 with
> an
> > LS1 canard.
> >
> > Ryan
> >
> > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...>
> wrote:
> > >
> > > Does any one have a LS1 on there quickie and is it that much
> better?
> > > Matt
> > > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...>
wrote:
> > > >
> > > > Leon,
> > > >
> > > > Do you have the LS1 templates avaliable yet for the Q1 ?
> > > >
> > > > Ryan
> > > >
> > > > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt'
<smoothmatson@y...>
> > wrote:
> > > > >
> > > > > I am ready to cut my candard. Before i start is it
> possible
> > to
> > > get
> > > > > LSI templates and intructions for my q1?
> > > > >
> > > >
> > >
> >
>
>
>
>
>
>
> SPONSORED LINKS
> Experimental aircraft Aviation gear Aviation Experimental
>
>

---

> YAHOO! GROUPS LINKS
>
>
> Visit your group 'Q1_Aircraft' on the web.
>
> To unsubscribe from this group, send an email to:
> This email address is being protected from spambots. You need JavaScript enabled to view it.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>

---

>
>
>
>
>

---

> Find your next car at Yahoo! Canada Autos
>
> [Non-text portions of this message have been removed]
>

--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'fuddworks' <rockaford99@h...>
wrote:
>
Rocky,

Tha