Q1_Aircraft: GU vs LSI

I am ready to cut my candard. Before i start is it possible to get
LSI templates and intructions for my q1?

Leon,

Do you have the LS1 templates avaliable yet for the Q1 ?

Ryan

--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...> wrote:
>
> I am ready to cut my candard. Before i start is it possible to get
> LSI templates and intructions for my q1?
>

Does any one have a LS1 on there quickie and is it that much better?
Matt
--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...> wrote:
>
> Leon,
>
> Do you have the LS1 templates avaliable yet for the Q1 ?
>
> Ryan
>
> --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...> wrote:
> >
> > I am ready to cut my candard. Before i start is it possible to
get
> > LSI templates and intructions for my q1?
> >
>

Matt,

Terry Crouch is the only one I know of that has a flying Q1 with an
LS1 canard.

Ryan

--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...> wrote:
>
> Does any one have a LS1 on there quickie and is it that much better?
> Matt
> --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...> wrote:
> >
> > Leon,
> >
> > Do you have the LS1 templates avaliable yet for the Q1 ?
> >
> > Ryan
> >
> > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...>
wrote:
> > >
> > > I am ready to cut my candard. Before i start is it possible
to
> get
> > > LSI templates and intructions for my q1?
> > >
> >
>

are ls1 quickies really that rare? i just picked up a project with
an ls1 and the carbon spars yesterday. i haven't really gone
through the kit yet to see what all is with it, i'll do that
sunday. if i can come accross the ls1 timplates (which i think i do
have, but i need to verify) i will be happy to share if anyone needs
them. i'll probably digitize them into autocad and get some lazer
cut aluminum timplates. if anyone is interested i could post the
autocad drawing.

rocky chambers
chattanooga, tn


--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...> wrote:
>
> Matt,
>
> Terry Crouch is the only one I know of that has a flying Q1 with
an
> LS1 canard.
>
> Ryan
>
> --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...>
wrote:
> >
> > Does any one have a LS1 on there quickie and is it that much
better?
> > Matt
> > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...> wrote:
> > >
> > > Leon,
> > >
> > > Do you have the LS1 templates avaliable yet for the Q1 ?
> > >
> > > Ryan
> > >
> > > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...>
> wrote:
> > > >
> > > > I am ready to cut my candard. Before i start is it
possible
> to
> > get
> > > > LSI templates and intructions for my q1?
> > > >
> > >
> >
>

Rocky,

I for one would be interested in the Q1 LS1 templates if they turn
out to be the real thing.

Please keep us posted.

thanks

John

--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'fuddworks' <rockaford99@h...>
wrote:
>
> are ls1 quickies really that rare? i just picked up a project
with
> an ls1 and the carbon spars yesterday. i haven't really gone
> through the kit yet to see what all is with it, i'll do that
> sunday. if i can come accross the ls1 timplates (which i think i
do
> have, but i need to verify) i will be happy to share if anyone
needs
> them. i'll probably digitize them into autocad and get some lazer
> cut aluminum timplates. if anyone is interested i could post the
> autocad drawing.
>
> rocky chambers
> chattanooga, tn
>
>
> --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...> wrote:
> >
> > Matt,
> >
> > Terry Crouch is the only one I know of that has a flying Q1 with
> an
> > LS1 canard.
> >
> > Ryan
> >
> > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt' <smoothmatson@y...>
> wrote:
> > >
> > > Does any one have a LS1 on there quickie and is it that much
> better?
> > > Matt
> > > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Tri-Q1' <rryan@s...>
wrote:
> > > >
> > > > Leon,
> > > >
> > > > Do you have the LS1 templates avaliable yet for the Q1 ?
> > > >
> > > > Ryan
> > > >
> > > > --- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Matt'
<smoothmatson@y...>
> > wrote:
> > > > >
> > > > > I am ready to cut my candard. Before i start is it
> possible
> > to
> > > get
> > > > > LSI templates and intructions for my q1?
> > > > >
> > > >
> > >
> >
>