elevator rigging for up and down

Start
Prev
1
Next
End

coote
Topic Author
Offline
New Member

8 years 8 months ago #1462 by coote

elevator rigging for up and down was created by coote

I have a nearly finished airframe and am in the process of rigging the elevators and need to know the range of motion for the elevators and can find nothing in the plans relating to this. Any information concerning this would be appreciated. The aileron information shows a 6 degree up and a 2 degree down for the reflexor and assume a normal max range on the deflection.

Please Log in or Create an account to join the conversation.

admin
Offline
Administrator

8 years 8 months ago #1463 by admin

Replied by admin on topic elevator rigging for up and down

Hi Coote,
I don't remember if you have a Q2 (with the GU airfoil) or if you have a Q-200 (with the LS1 airfoil) . . . knowing that is kind of important. There are jigging templates, on the large template sheets that help you set the correct throw up and down.

For the Q2 the templates are here:
BL48.8 GU Canard Elevator Rigging Template

For the Q-200 the templates are here:
BL48.8 LS1 Canard Elevator Rigging Template

Both templates are also included in the ULTIMATE Q2/Q-200 PACKAGE .

Hope this helps . . . please let me know.

Thanks,
Dan Yager
QBA Editor
www.quickheads.com

Flying an aeroplane with only a single propeller to keep you in the air. Can you imagine that?

— Captain Picard, from 'Star Trek: The Next Generation' episode 'Booby Trap.'

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: JonMatcho

Time to create page: 0.168 seconds

Login Form

elevator rigging for up and down