Hour 66 - Left Triangle
- Details
- Category: Quickheads BLOG
- Published: Wednesday, 28 October 2009 01:00
- Written by Dan Yager
- Hits: 3754
{flv}construction/hour066{/flv}
In the last video, I installed a small triangle of foam in the front of the right longeron. Well in this video I'm doing the same thing on the left side. Once all this cures, I can trim those little triangles to there final shape. Next I plan to flip the whole plane over on its back and sand the paint off the bottom. While it's upside-down, I should be able to apply the glass to the bottom of the area where the header tank will go.
Who knew it would take so long to fill in one gigantic hole in the fuselage. 
It will be nice to see the fuselage all in one piece. So stay tuned! We're getting there.
As always I invite your feedback below, or in the forums!