Hour 64 - Finishing the Floxing
- Category: Quickheads BLOG
- Published: Wednesday, 14 October 2009 01:00
- Written by Dan Yager
- Hits: 4550
In this video I finished up floxing and clamping the right longeron into position. Again I got good squeeze-out along the entire length and smoothed everything back out with a rubber glove and a squeegee.
When that was completed, I took a look from the other side to ensure that the flox wasn't dripping aggregiously out of anywhere. (I don't want to have to do much sanding on this stuff once it's cured.)
When I was satified with the right side, I used some of the excess flox to fill in a few small gaps between the fuselage and longeron on the left side. I could see the left side much clearer with all of the clamps removed. X-ray vision would come in very handy sometimes building this thing.
As always I invite your feedback below, or in the forums!