Hour 50 - Smoothing
- Details
- Category: Quickheads BLOG
- Published: Wednesday, 08 July 2009 01:00
- Written by Dan Yager
- Hits: 2554
{flv}construction/hour050{/flv}
The dry micro that I added to the top of the header tank was a little rough, so in this video I'm smoothing it all out by hand with some 60 grit sandpaper. There are still a few low spots, so I need to fill those in before I can add the glass and reinforce the area. All that should be happening really soon though, so stay tuned.
I'm still working out some video issues, but it's nice to have something to show you this week. Keep your fingers crossed.
As always I invite your feedback below, or in the forums!