Hour 26 - More Foam Shaping
- Details
- Category: Quickheads BLOG
- Published: Wednesday, 11 February 2009 00:00
- Written by Dan Yager
- Hits: 2548
{flv}construction/hour026{/flv}
In this clip I busted out the old sanding blocks again and started to put a final form to the two part foam. When I finished I put the Canopy in place and marked out where I wanted it to go. As you can see I need some more foam in the corners, but that will be remedied in my next video. (I got my half gallon kit of X-30 from TAP Plastics the other day.)
Seems I went a little crazy with the jamb saw near the spruce longeron and took off a bit too much foam. I'll have to fill in that area with a little more two part as well.
Stay tuned. It's starting to look like a real canopy frame!
As always, I invite your comments below, or in the forum!