Q2 Plans Chapter 3 Page 3-16
- Category: Q-2/Q-200 Plans
- Published: Sunday, 28 May 2006 03:05
- Written by Quickie Aircraft Corporation
- Hits: 6045
STEP TWO: COARSE FILLING
..... You must be extra cautious in this step or you may destroy your structure. When you take a peice of sandpaper and start grinding on your composite structure it's like using acid to clean a metal wing spar. It must be done carefully! Start by determining which areas require micro filler as shown using a flexible yard stick and a scale. Prepare the areas to be filled by hand-sanding lightly. Do not try to use a sanding block or spline on these areas.
CONTINUED ON NEXT PAGE