Login Form

QuickTalk 2 - BLACKBOARD

From Alden Johnson, #2553

"I made a lobster pot form by slotting three templates and filling the slots with 1/4" thick, 2" wide hardboard strip. The form was attached with 5-minute epoxy and fiberglassing was routine."



From Manny Lewis, #2394

"Build a jig from five duplicate fuel tank templates. After glassing outside, let cure and turn it over. Fit it into an inverse pair of templates to glass the inside."




You can order a PDF or printed copy of QuickTalk #2 by using the Q-talk Back Issue Order Page.