Q2 Plans Chapter 16 Page 16-02
- Category: Q-2/Q-200 Plans
- Published: Friday, 05 May 2006 20:05
- Written by Quickie Aircraft Corporation
- Hits: 3127
MOUNTING THE ENGINE
..... A typical engine mount assembly is shown in the sketches. Mount the engine permanently.
MOUNTING THE PROPELLER
..... The propeller is delivered to the builder with the mounting holes pre9rilled.
.....Make EM3 from a piece of 0.25" thick 606IT6 Aluminum. A full size pattern is provided.. Use the predrilled propeller to drill the six bolt holes in the EM3.
.....The propeller is mounted with 6 AN6-37A bolts. Note that the spinner is not shown in the illustrations because complete mounting instructions are included with the spinner itself.