Q-talk 129 - May/June 2008 - index
- Details
- Category: Q-Talk Index
- Published: Wednesday, 23 December 2009 16:24
- Written by Doug Humble
- Hits: 2946
Quickie Builders Association Together we build better planes! May/June 2008 Issue Number 129 |
Not so Sunny in Iowa City
Boy, what a difference a year makes. We gathered in Iowa City, but I wouldn't call it a fly-in.
This view out the airport conference room window tells it all. Just a year ago we were bragging about how much sun and fun we had at the Tandem Wing Spring Fling in Iowa City. The weather was 180 degrees out of phase from a year ago, so we just had the fun this year. Attendees were limited to less than 15 and had it not been for Paul Fisher getting a phone call from me late in the morning on Friday, we would not have had a plane fly-in. Our local host Greg Zimmerman has his Tri-Q200 based on the field so, officially we had two Q birds at our event. Bob Clarke from Ankeny, Iowa reported he flew in late Sunday morning and found no one around. That's just the way it was this year.
While we were waiting to see if the weather would improve, Kevin Boddicker took advantage of Paul Fisher's skill in wiring and had Paul wire up a new comm radio for him.
When Paul was done, he and Kevin even tested it. So, if it doesn't work in the airplane, Paul has witnesses that it wasn't his doing.
Greg and his wife Rosemary Zimmerman not only hosted me for the night, but cooked up a great breakfast on Saturday morning. You'll notice in the photos that we had to break out the coats and hover around the cooking stove. What a difference a year makes. There's always next year.
Articles from this issue:
Where was Sam hiding? - by Doug Humble
A Lesson on Airheart Brakes - by Paul Spackman
So What Is Your Gross Weight? - by Doug Humble
So What Does Your Panel LooK Like? - by Doug Humble
Hinge Inspection Tip - by Mike Dwyer
AirVenture Forum Plans - by Doug Humble
7th Annual Livermore Fly-in - by Sam Kittle
QBA on the Grow - by Doug Humble
A current QBA member may have one free ad per issue. It may be a maximum of five lines of type and will be edited to fit space available. Items advertised must be owned by the QBA member. The ad contact must be a member name. Ads will be run for two issues and then the ad must be resubmitted. [EDITOR'S NOTE: Please note that these ads may no longer be valid. They are included here only as part of the online archive.]
Wanted: Q200 Plans and Kit Looking for Q200 plans with templates and/or kit. Let me know what you have. Call Lance Hooley at (407) 361-0422 or email me at: This email address is being protected from spambots. You need JavaScript enabled to view it.
FOR SALE: Q2 w/ LSI Canard Q2 project assembled and ready to mount engine (no engine). I MUST clear my shop! Has LS1 canard. Final finish, cockpit and instrument panel not completed. Photos available. Any offer considered! 618-398-3393 Henry Hurd, Belleville IL
FOR SALE: Q1 Kit #154 Includes plans, Onan engine, canopy, prop, instruments & all manf. supplied parts less two blocks of foam. Boxed & stored in Raleigh, NC. Asking $3000.00. Dennis Lundberg 919-376-0374, Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
WANTED: I am a new Tri-Q200 owner and need a heavy nose gear. Anyone who has one for sale please Larry Seals at: This email address is being protected from spambots. You need JavaScript enabled to view it. or (870) 942-7677.
FOR SALE: Q1 Kit #11 60% complete. Engine with high compression heads, extra foam & fiberglass included. Make offer. John Cowan, Norman, OK (405) 447-5551-hm or (405) 535-1935-cell
FOR SALE: Misc. Q parts Molds for Q-200 cowl & spinner & back plate, Q2 canopy, misc. Airheart brake parts, Q2 pre-molded wheel pants & two Q2 CSA9 rudder pedals. Contact Marion Brown at: This email address is being protected from spambots. You need JavaScript enabled to view it.
FOR SALE: Tri-Q2 Selling due to my age. This Tri-Q2 has a Revmaster 65 HP engine and is about ready to taxi test. Asking $12,000 or best offer. Located in Glen Ellyn IL. Call Gordon Hanson at (630) 545-2107
FOR SALE: Revmaster Engine 50-60 hours. Call Glenn Hockenberry at (717) 243-1100
FOR SALE: Revmaster aluminum super engine block (not magnesium) Block is machined for 94mm pistons and cyclinders & up to an 84mm crank. Asking $600. Email Rene Robertson at: This email address is being protected from spambots. You need JavaScript enabled to view it.
See more ads at:
http://www.quickheads.com/forsale.html
Aircraft on display at this year's Jean NV fly-in. |
You can order a printed copy of Q-talk #129 by using the Q-talk Back Issue Order Page.