Q-talk 128 - Builder's Tip: Identify Those Wires!
- Category: Q-Talk Articles
- Published: Wednesday, 23 December 2009 16:24
- Written by Jeff Letempt
- Hits: 2175
Jeff Letempt gave the following answer on the Q-List to a person in the midst of wiring his Q bird. I liked it so much I had to reprint it here.
Using clear heat shrink tubing to identify your circuits is not that hard and it will certainly make things easier if you ever have a problem. I did this on many of my wires, but I got impatient and did not do it on all the wires. I did slip a piece of clear heat shrink on all the wires before I crimped on the terminal, so if I ever have nothing else to do I can go back and print out the labels and install them. Terminal Town's web site has a brief description on how to do the labels. See the link below:
You can order a printed copy of Q-talk #128 by using the Q-talk Back Issue Order Page.