Q1 Plans Chapter 11 Page 11-7
- Details
- Category: Quickie Plans
- Published: Tuesday, 02 September 2008 01:00
- Written by Dan Yager
- Hits: 1912
BRAKE INSTALLATION
The brake system consists of one mechanical tire scrubber per tire (BSW1), actuated by a 1/16” cable that runs over a pulley (AN210-1A) in the wheel pant, through the 3/l6" diameter Nylaflow tubing to the opposite wheel pant where it connects up to another BSW1 in the same fashion. The system is actuated by a pull handle in the cockpit. The brake shoes (BSW1) are spring loaded in the ‘off” position.
CONTINUED ON NEXT SHEET