Login Form

Q-talk 68 - CLASSIFIEDS

A current member may have one free Ad per month. It may be a maximum of five lines of type and will be edited to fit space available. Items advertised must be for or owned by the member. The Ad contact must be a member name. Ads will be run for TWO issues and then the ad must be resubmitted.


FOR SALE: Q2/200 fuselage that has not had anything done to it, it still is in the 4 pieces as molded by QAC, so it can easily be shipped or hauled. If interested contact me, Bud Starnes at (812) 985-2527 (Southern IN) or by email at This email address is being protected from spambots. You need JavaScript enabled to view it.


FOR SALE: Precision Propellers three-blade prop with leading-edge protection. 24" blades. Right-hand (I need LEFT-hand prop, hence the sale). Brand-spanking new. Never even mounted. $200. Alan (510) 582-7274 - CA


WANTED: TRI-Q conversion kit. Contact Bruce via E-mail - This email address is being protected from spambots. You need JavaScript enabled to view it.


FOR SALE: THUNDER QUICKIE - 1835cc VW, 345 TT, electric start, 5" wheels & hydraulic brakes, new paint, $6000 OBO - must sell. Jon Finley (612) 888-3093 - MN


FOR SALE: Quickie Q2, flown twice, crashed once. Entire airframe. Contact Ralph (715) 834-3838 - WI


FOR SALE: Q-2, 0 time Revmaster, on the gear, controls installed, surfaces all built, tail feathers removed for storage. Includes a 16' dually trailer to carry home. $6500 OBO - (512) 855-3801 - TX


FOR SALE: Due to stroke I have to sell my Q2, 95% complete. Revmaster 2100D engine, tricycle landing gear, carbon fiber spars, most instruments, quality workmanship. Best offer. Jim (847) 945-8099. E-mail This email address is being protected from spambots. You need JavaScript enabled to view it. - IL


FOR SALE: Q2 project firewall aft - no engine. LS-1 canard, wings, rudder and gas tanks built. $3K. Don Manak (414) 862-9803 - WI


WANTED: GSC SYSTEM PROPELLER - in need of a single blade from a three-blade 48 inch GSC Tech III prop. This should be without the leading edge protector. The blade reference number is 610. Don Johnson, UK, Tel. 01203-542456


FOR SALE: Q200 project, two fuselage kits, carbon spars, foam glass, epoxy - everything needed for airframe. Dick Sanders (402) 371-4227 FAX or Voice, E-mail This email address is being protected from spambots. You need JavaScript enabled to view it., 2209 Sunset, Norfolk, NE 68701


FOR SALE: Q2 ran out of engine and ended up in a field. New rear wing completed needs filling/rigging. Needs rear fuselage sections replacing. Firewall fwd ready for Revmaster 2100DQ. Full panel, dual control, T-tail and reflexor. All offers considered. Paul Wright, +44 385 503577 ENGLAND


FOR SALE: Kawasaki A 440 engine, with starter and belt drive reduction. Asking $650. Alan Thayer (510) 582-7274 or This email address is being protected from spambots. You need JavaScript enabled to view it.


FOR SALE: Bow gear Q1. No engine but includes Liquid/air cooled Rotax mount and cowl. See Q web for pics. $2500 FOB Huntsville, AL. $500 gets most VW engine and conversion stuff including X-mount. Chris Barber (256) 534-5872 or This email address is being protected from spambots. You need JavaScript enabled to view it.


WANTED: Q2/Q200 complete kit/plans, also looking for a trailer. Contact Steve Janicki - This email address is being protected from spambots. You need JavaScript enabled to view it. - (H) 650-802-0735, (W) 650-506-2740


FOR SALE: BRAND NEW untouched Revmaster cowl, original Quickie factory stuff. Q-200 cowl by Fitzgerald Composites Molded-in NACA vent on top for O-200 oil cooler and molded inlets in front. Dennis Colomb (707) 449-6355 - This email address is being protected from spambots. You need JavaScript enabled to view it.


STAINLESS STEEL EXHAUST PIPES FOR REVMASTER

There is a group of builders who are getting some 321 stainless steel exhaust pipes made that are equivalent to the factory systems. This is the best material that can be used and should outlast your airplane. To get the price down on production, they are looking for anyone interested in one to call David Hiatt at (425) 204-7804. The price should be around $450 to $500.




You can order a PDF or printed copy of Q-talk #68 by using the Q-talk Back Issue Order Page.