Articles
Hour 40 - Sitting Under the Canopy
- Details
- Category: Quickheads BLOG
- Published on Wednesday, 20 May 2009 05:00
- Written by Dan Yager
- Hits: 1038
{flv}construction/hour040{/flv}
In this clip, I am doing some more rough shaping on the bottom of the canopy frame. What I discovered, is that I need a better tool for this. (Pehaps the butchers knife called out for in the Quickie plans?) 
At any rate, I got the shape so that I thought it was "good enough" using just a sanding block, and a coping saw. Then I placed the canopy frame back on the airframe and began testing it out.
It looked so good I just couldn't resist sitting in the cockpit, and making some more engine noises!
As always I invite your feedback below, or in the forums!
Share:
