Quickheads

This is a ZIP file that contains all of the Large Appendix Sheets that went with the Q-200 plans.

To create these Template sheets, I used the original QAC Template sheets for the Q-2 plans and replaced the templates for the GU Canard with the LS1 Canard Airfoil Templates. I kept all of the other large templates including the Fuselage and Main Wing Templates on their original sheet numbers so that you can still follow along with the plans and avoid confusion.

Once payment is made you will be able to download the file, unzip it, and print the individual PDF files at a local printshop full size.

Since most print shops will have a printer that can produce prints that are 36" wide by any length, I have reformatted these Appendix sheets to fit on 36" paper. (The original QAC Appendix sheets were 38" wide.)

All of the PDF's include a border set within the printable area of the paper that can be checked with a ruler to ensure your print is not distorted.

This set of Q-200 Large Templates Sheets also contains the following 11x17 instruction set:

Construction of LS(1) 0417 MOD Q-200 CANARD (8 pages)

The actual template pages contain the following part templates:

Template Sheet #1

FS94 Bulkhead
FS120 Bulkhead
Side Console Vertical Piece
Wheel Pant Cover
Main Wing Aileron Rigging Template
LG1 Wheel Pant Core Template
Wheel Pant View B-B
Wheel Pant View C-C

Template Sheet #2

Seatback Bulkhead Top
Seatback Bulkhead Bottom
Main Fuel Tank Profile Template
BL48.8 LS1 Canard Core Female Jigging Template
FS175 Bulkhead Template
Center Console Vertical Piece
CS18
.125" Aluminum Parts Templates

CS17 Canard Midspan Pivot
C2 Canopy Catch
C1 Canopy Latch

.25" Phenolic Pieces

CS15
CS14
CS4
CS23
CS1
Q2CSP2
BS1
CS6
CS7
TS1

Template Sheet #3

BL15 Elevator Jigging Template
BL48.8 Elevator Jigging Template
BL100 Elevator Jigging Template
BL15 Elevator Slot Core
BL48.8 Elevator Slot Core
BL100 Elevator Slot Core
BL100 Aileron Slot Foam Core
BL100 Main Wing Core Template
BL0 LS1 Canard Core Template
BL15 LS1 Canard Core Template
BL48.8 LS1 Canard Core Template
BL100 LS1 Canard Core Template
BL15 Elevator Template
BL48.8 Elevator Template
BL100 Elevator Template
Instrument Panel Template
Firewall Template
LG4 Landing Gear Insert
CS19 1/4" Plywood
CS10 1/4" Plywood
CS22 1/4" Plywood
BS3 1/4" Plywood
BS2 1/4" Plywood
Wheel Pant View A-A

Template Sheet #4

FS20 Fuselage Female Jigging Template
FS53 Fuselage Female Jigging Template
FS120 Fuselage Female Jigging Template
BL100 Main Wing Core Female Jigging Template
BL100 Main Wing Trailing Edge Core Template
BL50 Main Wing Trailing Edge Core Template
BL50 Main Wing Core Template
BL50 Main Wing Aileron Foam Core
Aileron Template
Vertical Fin Core Template (tip)
Vertical Fin Core Template (root)
Vertical Fin Trailing Edge Template (inboard)
Vertical Fin Trailing Edge Template (tip)
Rudder Template

Template Sheet #5

BL48.8 LS1 Canard Elevator Rigging Template
WL20 Rudder Rigging Template
FS95 Fuselage Female Jigging Template
BL15 LS1 Canard Core Female Jigging Template
Vertical Fin Core Female Jigging Template (tip)
Vertical Fin Core Female Jigging Template (root)
BL100 Main Wing Core Female Jigging Template
FS159 Fuselage Feamle Jigging Template
BL50 Main Wing Core Female Jigging Template
BL100 LS1 Canard Core Female Jigging Template
BL00 Main Wing Core Template
BL00 Main Wing Aileron Foam Core
Top Side Console Piece

Template Sheet #6

FC1 Fuselage Cut Supports
FC2 Fuselage Cut Cable Separations
C3 Latch
O-200 Baffle Q-200-BF-2
O-200 Baffle Q-200-BF-3
O-200 Baffle Q-200-BF-4
O-200 Baffle Q-200-BF-5
O-200 Baffle Q-200-BF-6
Q-200-ICB-1 & 2
Q-200-CHB-1 & 2

Customer Reviews:

rnThe transaction went flawless, and I had my download password within seconds. Then came the big surprice, I was getting ready for a massive
download, expecting the tempaltes to be atleast 5Mb per sheet, but that turned out to be the total size of the ZIP file, and I was done in less than a
blink.rnI printed them, and it measured 100% with the border.rnThank you for all the effort to make this available.

Very impressive. High quality scans with good layout for printing on a 36" printer. I have confidence that the image is the right size when
printed with the very well designed border to measure off of. Transaction was super simple and the download was a breeze. Can't wait to start
building!

You may also be interested in this/these product(s)

Q2 & Q-200 Pilot's Manual $8.00

Q2 & Q-200 Construction Plans $29.95